Troubleshooting - Renkforce Sport Bluetooth Operating Instructions Manual

b) Switching on/off
• Press the button (1) for about 3 seconds to switch the headset on or off.
• The LED indicators (5) lights up blue once every 6 seconds when the headset is switched on.
The LED indicator (5) lights up blue 3 times every 6 second when a connection to a
Bluetooth device does not exist.
®
• The LED indicator (5) does not light up when the headset is switched off.
c) Pairing
Before it is possible to transmit between your Bluetooth
must be coupled with each other. This process is called „pairing".
When there is already a connection to a Bluetooth
resumed as soon as both devices are within range and switched on. To enable this
automatic reconnection, this function may need to be activated on the Bluetooth
device (please inform yourself on this point in the instructions for your Bluetooth
device).
• Press and hold the button (1) for 6 seconds, until the LED indicator (5) flashes blue/red.
• Turn on your Bluetooth device with which the headset is to be connected, and activate
®
pairing mode here (for more information, see the instruction manual of the corresponding
device). Now the device searches for Bluetooth
• When the headset is found, your Bluetooth
• Select the headset in your Bluetooth
• A code (0000) might have to be entered during pairing.
• After a successful pairing process, the LED indicator (5) flashes blue once every 6 seconds.
d) General Operation
Function Operation
Switching on/off
Press the
Pairing
Press the
e) Use as a hands-free system
Function Operation
Accept a call
Press the
Reject a call
Press and hold the
End a call
Press the
Redial
Press the
f) Music playback
Function Operation
Interrupting playback
Press the
Continue playback
Press the
Track jumps forward
Press the
Track jumps backwards
Press the
Press and hold the
Increases the volume
volume
Press and hold the
Decreases the volume
mum volume
Care and cleaning
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions
since these could damage the housing or even impair operation.
• Use a dry, lint-free cloth to clean the headset.
• The ear plugs can be removed from the headphones for cleaning.
device and the headset, both devices
®
device, it will be automatically
®
devices in the reception range.
®
device displays its name (TH-BT71).
®
device.
®
button (1) for 3 seconds
button (1) for 6 seconds
button (1) briefly
button (1)
button (1) briefly
button (1) 2x briefly
button (1) briefly
button (1) briefly
button (2) briefly
button (3) briefly
button (2), a signal sounds at full
button (3), a signal sounds at mini-

Troubleshooting

The headphones do not respond to button commands, stop playback automatically, or
cannot be turned on
• The battery is discharged, please recharge completely.
No sound
• The volume on the Bluetooth
• The Bluetooth pairing is no longer available; repeat the pairing process.
®
• The operating range (max. 10 m) was exceeded.
In the sound playback there are dropouts
• The operating range (max. 10 m) was exceeded.
• Nearby there are other devices interfering with the radio transmission. Increase the distance
®
to radio-controlled devices or devices that have a high level of interference (strong electric
®
motors, fluorescent lamps, microwaves, etc.).
Disposal
Electronic devices are recyclable material and do not belong in the household
waste. Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
The built-in rechargeable battery cannot be removed and must therefore be dis-
posed along with the device.
Technical data
Charging voltage ..................................5 V/DC (USB)
Rechargeable battery ...........................Lithium battery, 3.7 V/70 mAh
Operating time ......................................approx. 5 h (by 50% volume)
Standby time .........................................approx. 150 hours
Charging time .......................................approx. 1.5 hours
Frequency range ..................................20 – 20000 Hz
Transmission frequency........................2.4 GHz
Transmission power..............................0.22 mW
Range ...................................................approx. 10 m
Bluetooth version ................................4.1
®
Bluetooth profiles ................................A2DP / AVRCP / HSP / HFP
®
Weight ..................................................13 g
Operation/storage conditions ................temperature -10 °C to +50 °C
Declaration of conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this
product conforms to the 2014/53/EU directive.
The full text of the EU conformity declaration is available via the following Internet
address: www.conrad.com/downloads
Select language by clicking a flag symbol and enter the order number of the product
in the search field; then you will be able to download the EU declaration of conform-
ity in PDF format.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2017 by Conrad Electronic SE.
device is set to minimum.
®
1543450_V1_0517_02_VTP_m_en