Leckey Everyday Activity Seat User Manual page 27

the pelvic harness is secure after
each spasm to ensure the child
is safe and cannot slide forward
in the seat.
If the child is active or has
extensor spasms check the
pelvic harness is secure after
each spasm to ensure the child
is safe and cannot slide forward
in the seat.
Always fasten the centre buckle
on the pelvic harness before
making any other adjustments.
10.4 CHASSIS
The Everyday Activity Seat is designed
to fit onto several Chassis options.
Size 1 fits onto the hi-low gas spring
chassis. Size 2 fits onto the hi-low gas
spring and hi-low powered chassis.
Size 3 fits onto the hi-low hydraulic
chassis. This user manual shows the
correct and safe use of the seating
system with these chassis options.
The castors on the chassis include
directional locks. To apply the locks
Everyday Activity Seat User Manual p27
push down on the grey pedal. When
the directional locks are in use the
chair will steer with the back castors.
10.5 HEIGHT
ADJUSTMENT – HI-
LOW CHASSIS
You can carry out this adjustment
with the user in the chair. To adjust
the height of the hi-low chassis
press the foot lever at the rear of
the chassis whilst holding the push
handle. Once you remove your foot
from the pedal the seat will be fixed
at the chosen height. For safety the
height adjustment pedal on the
chassis can be locked by engaging the
locking pin on the right hand side
of the pedal. To unlock pull the pin
out and rotate 90 degrees, the pedal
can then be operated. The locking
pin should be kept in the locked
position when you are not adjusting
the chassis.
Before using the foot pedal, pull the
pedal out away from the seat.