Toyota SIENNA Owner's Manual page 16

Wheelchair accessible van
Hide thumbs Also See for SIENNA:
Table of Contents

Advertisement

CUT THE VEHICLES IG NITIO N SW ITCH O FF AND PRESS THE RELEASE SW ITCH O N THE CO NTRO L PANEL. The locking
levers in the docking base will disengage and hold open for five seconds allowing you to exit the system . THE DO CKING SYSTEM
W ILL NO T RELEASE THE W HEELCHAIR W ITH THE VEHICLE'S IG NITIO N O N ; this is an im portant safety feature and m ust not
be disabled. If the system is NO T occupied by a wheelchair user, the audible alarm m ay be tem porarily deactivated by pressing th e
EZ-LOCK INSTRUCTIONS
deactivation switch on the right side of the control panel. Never lock the docking base m anually to silence the alarm . Attem pting to
enter a docking base that has been m anually locked will result in dam age to internal com ponents.
IF THE VEHICLE LO SES ELECTRICAL PO W ER, THE EM ERG ENCY RELEASE LEVER SHO ULD BE PUSHED TO THE LEFT
TO RELEASE THE W HEELCHAIR.
The system control panel must be mounted in an area that is readily visible to the driver of the vehicle. The control panel provides
a release switch as well as displaying the docking base system status through an array of colored lights and an audible alarm. The
control panel also allows the system to be fully deactivated for occasions when the docking base is not being used. For passenger
applications an additional release switch may be provided in an area closer to the docking station for the convenience of the
passenger or attendant.
FLASHING YELLOW AND RED LIGHTS COUPLED WITH A PULSING AUDIBLE ALARM INDICATE THE CONTROLS HAVE
BECOME DETACHED FROM THE DOCKING BASE. DO NOT USE THE SYSTEM UNTIL THE PROBLEM CAN BE
CORRECTED BY AN AUTHORIZED TECHNICIAN.
COPYRIGHT © 2008 EZ Lock Inc.
12

Advertisement

Table of Contents
loading

Table of Contents