Seating Securement - Toyota SIENNA Owner's Manual

SEATING SECUREMENT

Instructions For Use:
1. Place wheelchair in the vehicle facing forward and in a
suitable position.
2. Preselect a position on the wheelchair to attach the hook and a
position on the floor to attach the floor latch end of the strap.
3. Release the buckle latch on the strap. With the buckle released,
pull the webbing to create enough slack so that the restraint belt can
be attached to the floor and the wheelchair.
4. Connect the floor latch to the pre-selected location on the floor
track by pushing the fitting with even pressure into the track and
slide the fitting in one direction until spring loaded latch drops into
place. Pull on the strap to make sure it is secure.
5. Find the handhold strap and pull to tighten the strap. Make sure
there are no twists or knots in the strap.
6. Lock buckle by pushing down until the buckle latch locks in place.
7. Repeat the procedure for each of the four designated positions.
7