Ibiza CROSS-GOBOFX User Manual page 5

4. Press enter to set the speed from SP0 to SP9
5. Press <Enter> to confirm, or press "MENU" to exit.
6) LED display setting: Choose OFF if you want the display to switch off after 30 seconds of non-use.
1. Press MENU.
2. Press UP/DOWN to choose [LED], press ENTER
3. Press<Up/Down> to choose 'ON' or 'OFF'
4. Press <Enter> to confirm, or press "MENU" to exit.
7) Display reverse setting
1. Press MENU.
2 .Press UP/DOWN to choose [Disp], press ENTER
3. Press<Up/Down> to choose 'ON' or 'OFF'
4. Press <Enter> to confirm, or press "MENU" to exit.
8) Test run
1. Press < ENTER>
2. Press < UP/DOWN> to select [Test], then press < ENTER> to do the whole test
3. Press <Enter> to confirm, or press "MENU" to exit.
9) Software Version
1. Press < ENTER>
2. Press < UP/DOWN> to select [Ver], then press < ENTER>to check the light's version information
3. Press <Enter> to confirm, or press "MENU" to exit.
Remote Control
1. ON/OFF
2. Automatic mode
3. Music controlled modes
4. Strobe mode
5. Selection of one of the built-in programs
6. Setting of sensitivity and speed of the music controlled mode
7. Setting of sensitivity and speed of the strobe mode
Description of the Channels
4-Channel operation 28-Channel
CH1
CH2
CH3
©Copyright LOTRONIC 2017
Function
CH1 Dimmer
CH2 Strobe
Color Chase
000-255 Strobe (speed 0 – 100%)
CROSS-GOBOFX
Value
000-255 0% - 100%
000-007 no function
008-022 Chase 01
023-037 Chase 02
023-037 Chase 02
038-052 Chase 03
053-067 Chase 04
068-082 Chase 05
083-097 Chase 06
098-112 Chase 07
113-127 Chase 08
128-142 Chase 09
5