Setup Menu - Yaesu FTM-400DR Firmware Update Instruction Manual

3. Touch [RESET/CLONE]
DISPLAY
SIGNALING
W  RES
APRS
4. Check the Version No. displayed at the top of the screen.
If the MAIN Version No. has been updated, the firmware update was successfully completed.
(PANEL Version No. will not be updated.)

SETUP MENU

TX/RX
SCAN
CONFIG
SD CARD
RESET/
BACK
BACK
CLONE
RESET/CLONE
 FACTORY RESET
 PRESET
 RECALL PRESET
 MEM CH RESET
BACK
BACK
MEMORY
DATA
OPTION
CALLSIGN
VERSION
MAIN :2.x
PANEL:1.x
〉
〉
〉
〉
15