Advertisement

Quick Links

Installation
manual
IRON DOG 01-06
©2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IRON DOG 1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Brunner IRON DOG 1

  • Page 1 Installation manual IRON DOG 01-06 ©2019...
  • Page 2: Table Of Contents

    Fireplaces may be set up only in rooms or areas with no risk of danger due to their state, structure or intended use. Other manuals accompanying the insert are to be considered. Subject to technical changes. Please read attentively this installation manual before the beginning of the installation. Installation manual (1.4) © 2019 Brunner GmbH...
  • Page 3: Delivery Contents

    Caution when turning over the device - loose parts! Stove top, baffle plate, grill and accessories are not screwed to the device. In order to reduce the weight during transport, these parts can be removed. © 2019 Brunner GmbH Installation manual (1.4)
  • Page 4: Identification Plate

    Iron Dog 06 can be found on the soot door. Here you will find information about the permissible fuels and the serial number, needed in case of spare part orders. Please copy this serial number in the user manual. Illustr. 1: Identification plate Installation manual (1.4) © 2019 Brunner GmbH...
  • Page 5: Dimension Drawings

    DIMENSION DRAWINGS Iron Dog 01 Iron Dog 02 © 2019 Brunner GmbH Installation manual (1.4)
  • Page 6 Iron Dog 03 Installation manual (1.4) © 2019 Brunner GmbH...
  • Page 7 Iron Dog 04 Iron Dog 05 © 2019 Brunner GmbH Installation manual (1.4)
  • Page 8: Requirements To The Installation Area

    The floor area where the device is installed must be large enough and configured in such a way that it allows a proper operation of the stove. Installation manual (1.4) © 2019 Brunner GmbH...
  • Page 9: Installation

    Illustr. 4: Losening the retaining plate The maximally allowable load of the unfolded stove top plates of the Iron Dog 03 is about 10 kg. Point this out to the operator of the Iron Dog 03. © 2019 Brunner GmbH Installation manual (1.4)
  • Page 10: Distances

    Without radiation shield the minimum distance "O" should be kept. The safety distance of the smoke pipe to the ceiling of the building “A” depends on the material used for the ceiling. Installation manual (1.4) © 2019 Brunner GmbH...
  • Page 11 Illustr. 6: Recommended distances to the Iron Dog 01 - Iron Dog 05 Illustr. 7: Recommended distances to the Iron Dog 06 © 2019 Brunner GmbH Installation manual (1.4)
  • Page 12: Combustion Air

    (their components must have a fire resistance rating of >90 minutes (F90)). See also regional building law. Installation manual (1.4) © 2019 Brunner GmbH...
  • Page 13: Chimney And Smoke Pipe Connection

    Up to the first reaching of the maximum operating temperature, the paint keeps hardening. This may cause some smoke and smell nuisances. Therefore it is important to ensure sufficient room ventilation. Open doors and windows. Don’t stay in the room longer than necessary. Please read the user manual! © 2019 Brunner GmbH Installation manual (1.4)
  • Page 14 To the front "V" Tested according to EN13240 EN13240 EN13240 EN13240 EN13240 EN12815 The data are acquired during a EN 13240-test – room heater with horizontal smoke pipe connection, pipe length 35 cm Installation manual (1.4) © 2019 Brunner GmbH...
  • Page 15 Ulrich Brunner GmbH Zellhuber Ring 17-18 D-84307 Eggenfelden Tel.: +49 (0) 8721/771-0 Fax: +49 (0) 8721/771-100 Email: info@brunner.de Art.Nr.: 19873 © 2019 Brunner GmbH Installation manual (1.4)

This manual is also suitable for:

Iron dog 2Iron dog 3Iron dog 4Iron dog 5Iron dog 6

Table of Contents