Leupold GX Series Operating Instructions Manual page 15

FUNCTION 2: CURRENT TEMPERATURE INPUT (GX-II ONLY)
Temperature is one of the factors used to determine
2
TGR ranges; inputting the current temperature will 3
4
5
increase the accuracy of your TGR measurement . The
6
7
default temperature setting is 75 degrees F . After
8
9
activating TGR, the last saved temperature will be
P
flashing in the bottom portion of the display . Press
POWER to set the temperature to match the current
conditions; each depression of POWER will increase the
temperature setting by 5 degrees . The total range of available temperature
settings is 30 degrees to 120 degrees F . Press MODE to save your setting and
move to the next function .
NOTE: If yards is selected, the temperature will automatically be measured in
Fahrenheit. If meters is selected, the temperature will be measured in Celsius.
12