Maintenance Instructions - Fiamma CARRY - BIKE Installation And Use Instruction

EN

MAINTENANCE INSTRUCTIONS

MAINTENANCE INSTRUCTIONS
- The FIAMMA Carry-Bike is a bicycle carrier for caravan that carries 2 or 3
bicycles, which should not exceed the total weight of 35 or 50 kg, depending
on the model.
- Fasten the Carry-bike to the A-frame or to the rear bearing structure of the
caravan.
- We recommend that the area where the bicycle rack will be mounted be
cleaned before installation.
- The bicycles must be fastened with the specially provided straps.
- Make sure that the support brackets are located where they cannot move or
shift sideways.
They also must not touch the roof of the vehicle, the hinges and the
corresponding bolts or screws.
- Periodically check the bicycle rack to make sure it is firmly attached, especially
after the first 10 km.
Make sure the belts are not loose and that the holding brackets have not shifted.
- Make sure that fastening is secure: each time you start out on a trip, stop and
check that the bicycles are securely fastened after the first short run.
- DO NOT COVER THE NUMBER PLATE OR LIGHTS
- In the case of a long period of disuse, we suggest that you unhook the bike
carrier.
- The load must be evenly distributed and must not exceed the maximum width
of the vehicle.
- Be careful when driving and beware of gusts of wind. Also keep in mind that
you need a longer braking distance.
- In some cases, the bicycle rack interferes with using the rear windscreen wiper.
Carefully examine the brush radius before turning on the rear wiper.
- In case of use of the bike carrier with tow make sure that the tow hook is always
accessible and that the corner mobility of the tow is guaranteed (volume
measuring DIN 74058).
- FIAMMA is not liable for damages arising from non-observance of the laws in
force, the installation, carriage and maintenance instructions or from incorrect
use of the bike carrier.
10
®
®