Silvercrest SLB 20 A1 Operating Instructions Manual page 85

♦ Press the
speaker (which will function as the left
speaker) for about 3 seconds. You will
hear a beep and the TWS LED
flashes green during the pairing.
♦ If the pairing of the two speakers has
been successful, you will hear a short
beep. TWS mode is active and the
TWS LEDs
light up green.
♦ Pair the left speaker with an external
Bluetooth
♦ Start playback on the external
Bluetooth
NOTE
► If you do not pair the two speakers
within 3 minutes, the speakers will turn
off automatically. In this case, you will
have to switch the speakers back on
again before restarting the pairing
process.
► Make sure you position the left and
right speakers correctly for playback.
► The Play/Pause/Forward/Back/Bass-
Boost buttons work on both speakers in
TWS mode.
│
■ 82
®
®
GB │ MT
7
button
8
on both speakers
device.
device.
on the first
SLB 20 A1
8