1. Manuals
  2. Brands
  3. Flavor Burst Manuals
  4. Touch Panel
  5. JBT Series
  6. Operation manual

Flavor Burst JBT Series Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Flavor Burst
®
Jumbo Touch Panel
Operations Manual*
*for installation and maintenance
information on your Jumbo Touch Panel,
please consult your JBT system's full
Operations Manual.
Manufactured by
Flavor Burst Company
499 Commerce Drive
Danville, IN 46122
For general information and to locate a
distributor near you, call or visit our website:
Phone: (317) 745-2952
Toll Free Number: (800) 264-3528
Fax: (317) 745-2377
www.flavorburst.com
For pricing, ordering and support, contact one
of our qualified distributors.
Warranty
An installation and warranty form is provided with every Jumbo Touch Panel "JBT" system, located
inside the unit with this manual. It is important that the operator carefully review the warranty and
installation documents accompanying the unit before using this system. Any questions or concerns
regarding the warranty should be clarified upon delivery or installation. For more information, contact
your local authorized Flavor Burst
®
distributor.
©2017 Flavor Burst Company
Printed in August
Printed in
All Rights Reserved
The United States of America

Advertisement

Table of Contents
loading

Related Manuals for Flavor Burst JBT Series

Summary of Contents for Flavor Burst JBT Series

  • Page 1 It is important that the operator carefully review the warranty and installation documents accompanying the unit before using this system. Any questions or concerns regarding the warranty should be clarified upon delivery or installation. For more information, contact your local authorized Flavor Burst ® distributor.
  • Page 2 PAGE INTENTIONALLY LEFT BLANK...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Introduction……………………………...………………………………………….………….3 Safety Precautions……………………………..…………….………..……..….…………..3 Drawing a Serving……..………………………….…….…..…….…………………………..5 Initial Setup and Settings………………………………………….………………..………9 Power Up, Maintenance Menu, & Shut Down……………...……………..…..9 Set Date and Time………………………………………………………………..……11 Choose Available Languages………………………………………………..….……12 Password Setup…………………………………..……………………………...…..13 Equipment Setup Wizard…………………………………..………………..…...15 Communications Setup…………………………………..…………...…...…17 Setup Trays and Dispense Speeds………………………..…………....…18 General Settings…………………………………..……………………………...…21 Flushing and Priming Settings……………………………………………………..23 Flushing Functions…………………………………………........…24 Priming Functions………………………………..…………...……………..…..…26...
  • Page 4 PAGE INTENTIONALLY LEFT BLANK...

  • Page 5: Introduction

    DO NOT operate the system without Touch Panel. For operations and maintenance reading this operator’s manual. Failure to follow instructions on the Flavor Burst equipment this instruction may result in equipment itself, please refer to your model’s complete damage, poor system performance, health Operations Manual.
  • Page 6 PAGE INTENTIONALLY LEFT BLANK...

  • Page 7: Drawing A Serving

    FEATURE IS AN OPTIONAL SETTING. WHEN 1. If you are dispensing product from a barrel IT IS PRESENT, JUST TAP THE SHOWCASE that is not connected to the Flavor Burst TO GO TO THE SERVING SIZE SCREEN IN system, simply draw product from the spout.
  • Page 8 4. Select the flavor(s) by touching the flavor 5. MANUAL DRAW SYSTEM: Hold a cup button. More than one flavor can be under the spout. Pull the draw handle all selected for a multi-flavor serving. the way into the open position. If you have Selected flavors show a green check mark.
  • Page 9 6. AUTO DRAW SYSTEM: The Auto Draw System has no draw handle on the spout and a green button is displayed below the flavor menu. Hold the cup under the spout, and press and hold the green button on the screen to dispense.
  • Page 10 PAGE INTENTIONALLY LEFT BLANK...

  • Page 11: Initial Setup And Settings

    2. Touch the Flavor Burst logo to open the INITIAL SETUP & SETTINGS Flavor Burst app. Flavor Burst Terms of Use will appear. Read and accept the The Jumbo Touch Panel is designed with the terms to continue to the Jumbo Touch Panel operator in mind.
  • Page 12 4. To access the programming features of the 7. To exit the Flavor Burst program, access Maintenance Menu, press and hold the area the Maintenance Menu and scroll down to in the top left corner of the screen. There is the bottom of the menu.

  • Page 13: Set Date And Time

    2. Find your list of apps by touching the dotted button at the bottom of the screen. 3. Touch the Settings icon. 6. Touch the Home icon at the bottom to return the home screen and open the Flavor Burst app.

  • Page 14: Choose Available Languages

    4. If you would like to change the currency, Choose Available Languages touch the “Currency” and make your The Jumbo Touch Panel is programmed to selection. Currency will only appear if you display different languages. You can choose display prices for different serving sizes. one default language, or set up the panel for two languages, which can be useful for multilingual workplaces and self-serve...

  • Page 15: Password Setup

    This is ideal for the self-service environment, where many people will have access to the Jumbo Touch Panel. If the freezer and Flavor Burst are being maintained and cleaned by someone other than you, simply let them know the Operator...
  • Page 16 “Equipment Setup Wizard”, and “Transfer Files to Jumbo Touch Panel” sections of the Maintenance Menu. If a password is forgotten, contact Flavor Burst Company to obtain an override password. 1. Press the “Password Setup” section in the NOTE: THE ADMINISTRATOR PASSWORD Maintenance Menu.

  • Page 17: Equipment Setup Wizard

    Maintenance Menu. Enter the Administrator Password if prompted. 2. Select how many spouts are connected to the Flavor Burst system. If only one spout will feature Flavor Burst flavors, select “one spout.” If you are using a 44FCB system on two spouts or have added a Base-2S unit to another spout, select “two spouts”...
  • Page 18 4. ONE SPOUT: Designate which pump and 6. TWO SPOUTS: If Flavor Burst blending motor cables connect to which ports on the systems are attached to two spouts, the electronics board (located inside the cabinet Jumbo Touch Panel needs to know which top).

  • Page 19: Communications Setup

    “Edit Wifi Connection” and select from the available wifi providers on the next screen. 10. When the Flavor Burst system is attached to two spouts, you will see a green button on some of the screens that says CHANGE SPOUT.

  • Page 20: Setup Trays And Dispense Speeds

    Burst icon to the right. The higher the Setup Trays and Dispense Speeds number (up to level 10), the more syrup is These settings allow the operator to enable and dispensed per serving. To decrease the disable pumps to allow or prevent dispensing, rate, slide the icon to the left.
  • Page 21 6. To change the flavor label graphic that 8. If you are keeping the same flavor but want shows on the menu screen, touch “EDIT to modify the name, press EDIT FLAVOR GRAPHIC”. and modify the name. 7. This will take you to the image gallery of the Jumbo Touch Panel.
  • Page 22 11. If there is more than one spout dispensing Flavor Burst, press the green CHANGE SPOUT button to access the settings for that spout’s trays and flavors.

  • Page 23: General Settings

    3. WHITE CAP TIME: “White Cap” is the General Settings feature that helps clear out the spout at the The settings under “General Settings” pertain to end of one serving so that the next serving the system overall. They are not necessarily has reduced carryover flavor.
  • Page 24 Flavor Burst menu under the correct spout. NOTE: WHEN USING TIMED SERVINGS, MAKE SURE THE “MAXIMUM DISPENSE TIME”...

  • Page 25: Flushing And Priming Settings

    7. USE SHOWCASE PANEL: The showcase Flushing and Priming Settings panel displays on the front screen in the placard place above the Flavor Burst spout. In this section, you can adjust how long the It scrolls through all the flavors, so the pumps will run during the Flush and Prime operator can see what is available.

  • Page 26: Flushing Functions

    3. Follow the instructions on the screen by Flushing Functions disconnecting the Syrup Bag Connector Flushing functions are used to clean and from the syrup bag. sanitize the syrup lines, syrup pumps, and 26270 spout. This is done whenever a syrup bag is switched with a different flavor, during the 30- day routine maintenance of the Clean-In-Place procedure, and when winterizing the unit.
  • Page 27 6. Press one of the Flush buttons. The 9. If there is more than one spout using the FLUSH CONTINUOUSLY button will Flavor Burst system, press the green continue indefinitely until you press the CHANGE SPOUT button to access that CANCEL button.

  • Page 28: Priming Functions

    Keep priming the line until the syrup is running fresh and undiluted. 6. If there is more than one spout dispensing Flavor Burst, press the green CHANGE SPOUT button to access that spout’s syrup lines. (spout 2)

  • Page 29: View Serving Statistics

    The Jumbo Touch Panel records the serving count according to the different flavors are counts for each spout the Flavor Burst system recorded on this screen. Scroll down to see is connected to. It also organizes those serving the syrup usage graph.

  • Page 30: Setup Containers, Sizes, Prices

    NOTE: TIMED SERVINGS FEATURE CAN to show prices, and NO to hide prices on ONLY BE USED ON THE SPOUT USING THE the main screen. FLAVOR BURST SYSTEM. THE OTHER SPOUTS ARE NOT CONNECTED TO OR CONTROLLED BY THE JUMBO TOUCH PANEL.

  • Page 31: Adjust Dispense Time Limits

    Adjust Dispense Time Limits Edit Flavor Names List This screen allows the operator to define how The Flavor Names List includes all flavors, not long the system dispenses for each serving just the ones currently installed in the trays. size. These options are only visible with the Add, change, or delete flavors and label Timed Serving Sizes function enabled.

  • Page 32: Edit Flavor Names List

    15. To change the flavor name, press the EDIT 16. To create your own flavor name, press the NAME button next to the flavor name. ADD A NEW FLAVOR button at the bottom. NOTE: THERE ARE NO PRELOADED NOTE: WHILE THE NAME IN THE FLAVOR GRAPHICS FOR CUSTOM FLAVORS.

  • Page 33: Design Placards

    “BACK” AT THE TOP LEFT CORNER OF THE MAINTENANCE MENU. 20. The spout(s) dispensing Flavor Burst syrup will show a Flavor Burst logo here. This is 24. You can also create a simple text-with- a placeholder for the menu or the showcase background placard.
  • Page 34 28. To change or add text to the placard, tap 25. Here you will see a design program to the line next to “Edit Text” and type in the change the colors of the background, text, text you wish to appear on the placard. and to change the text itself.

  • Page 35: Multimedia Options

    3. In the Jumbo Touch Panel’s Image Multimedia Options Galleries, find and select the Backgrounds Customize and change the background folder. Then scroll and select a background displayed on the Jumbo Touch Panel’s main image to display. screen. You can also select advertising screens and videos to run while the freezer is not being used.
  • Page 36 7. The Jumbo Touch Panel background video desired color and shade for the background. is comprised of several short video clips based on Flavor Burst flavors. You can add or remove flavors from this list based on what you are current serving.
  • Page 37 9. To remove any flavors from the video loop, 12. Press “Apply Changes” to save the press the red “X” beside that flavor video. changes. Select the Video Gallery folder and choose from the videos available to add to the list. NOTE: IF YOU MAKE A CHANGE TO YOUR MENU OPTIONS, BE SURE TO CHANGE YOUR VIDEO TO MATCH IT.

  • Page 38: Transfer Files To Jumbo Touch Panel

    4. The four different categories ensure the new Transfer Files to Jumbo Touch Panel files are uploaded from the thumb drive to New files can be uploaded directly to the Jumbo the correct folders. There are three Touch Panel via USB drive, making the Jumbo different types of files you can upload: Touch Panel very customizable.

  • Page 39: Contact Information

    It also shows information copies files and settings to the card. In the on the Flavor Burst App Version and Database event of a Jumbo Touch Panel failure, the files Version, which may help in troubleshooting in can be transferred over to a new Jumbo Touch the future.
  • Page 40 4. To transfer files from a failed Jumbo Touch If you are replacing electronics boards, Panel to a new or repaired one, power down replace the parts with new ones and then and turn off the Jumbo Touch Panel. reinstall the microSD card into the slot. Unplug all the cables and remove it from the 8.

  • Page 41: Testing The Jumbo Touch Panel System

    TESTING THE JUMBO TOUCH PANEL NOTE: YOU CAN ALSO ADJUST THE SYSTEM FLAVOR STRENGTH IN A SERVING BY SLOWING OR SPEEDING UP THE FREEZER’S DRAW RATE. Once the system is enabled to dispense flavors, test each flavor to ensure they all dispense properly and that the Blending Assembly 3.
  • Page 42 shorter dispense time results in narrower layers; a longer dispense time results in wider layers. You can fit more flavor selections in a serving with narrow layers, however, the layers may blend together. Wider layers will show a more distinct color and flavor difference between layers, but will have limitations on how many flavors can be dispensed in one serving.
  • Page 43 © 2017 Flavor Burst is a registered trademark of the Flavor Burst Company. Taylor is a registered trademark of the Taylor Company. All rights reserved.

This manual is also suitable for:

Jumbo

Table of Contents