Page 1
Flavor Burst ® Color Touch Panel F10B Operations Manual* *for installation and maintenance information on your Color Touch Panel, please consult your CTP model’s full Operations Manual. www.flavorburst.com/support/ *Visit “Color Touch Panel Files” to update your panel to the most current program.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
DO NOT operate the system unless it is full-color, touch-controlled command center for properly grounded. Failure to follow this your Flavor Burst system. The panel not only instruction may result in electrocution. displays the flavors available with your Flavor Burst system, it can also be set up to show...
COLOR TOUCH PANEL – PORTS & FEATURES General System Overview (See Figure 1) ITEM DESCRIPTION FUNCTION Secondary switch port used if switch port #1 fails, or when using the Color Touch Panel to receive information from two freezers SWITCH PORT #2 (for the “44”...
DRAWING A SERVING 2. If the Flavor Burst system is attached to two This section is a quick reference on how to spouts, select the product type / spout you draw a Flavor Burst serving with the Color wish to draw from.
Page 10
SEE SECTIONS “ENABLE OR DISABLE SERVING OPTIONS” AND “ADJUST DISPENSE TIME LIMITS” OF THE MAINTENANCE MENU. NOTE: IF A FLAVOR BURST BASE UNIT IS ALSO ATTACHED TO THE SAME SPOUT AS YOUR STANDARD UNIT, 16 FLAVOR CHOICES MAY APPEAR ON THE MENU.
Page 11
6. MANUAL DRAW: Hold a container under 7. AUTOMATIC DISPENSING MODE: If your the spout to catch flavor product. Pull the screen shows a TOUCH TO DISPENSE draw handle down to dispense product. If button, tap this button to dispense rather you have the timed servings enabled, draw than using the draw handle.
Accessing Flavor Burst Maintenance Menu The Maintenance Menu is where all of your Touch Panel Settings are outlined for easy access. Through the menu, the operator can perform maintenance procedures and change settings on the system.
Choose Available Languages 6. If you are displaying more than one language, choose your Second Language, The Touch Panel is programmed to display currency and flag icon. When selected, this different languages. You can choose one secondary language will display on the default language, or set up the panel for two product and dispense screens.
Password if prompted. access to the Color Touch Panel. If the freezer and Flavor Burst are being 2. To require an Operator Password to protect maintained and cleaned by someone other than access to the Maintenance Menu, tap the you, simply let them know the Operator blue bar to ON.
Page 16
5. To test the Operator Password, press the BACK key at the top left to return to the product screen. Then, press and hold the logo (or top center) of the screen until a box appears asking for a password. Type in the Operator Password and press OK.
NOTE: “BLENDED” PRODUCT IS NOT COMMONLY USED. CHOOSING TO BLEND FLAVORS MAY RESULT IN UNDESIRABLE 3. If you have only one Flavor Burst system BLENDED FLAVORS AND COLOR. attached to one spout, press NEXT at the bottom of the screen and skip to Step 6.
Page 18
6. Assign a product type for the spout(s). 8. Scroll down and select the switch input for the spout(s). The switch tells the Touch Panel to activate when a serving is drawn from the freezer. A hardwired switch connects the Touch Panel to the freezer through a cable.
Check with name to create your own flavor name. Flavor Burst Company for updates to the programming. Setup Trays and Dispense Speeds These settings allow the operator to enable and...
General Settings View Equipment Cleaning Videos The settings under “General Settings” pertain to The new update for the Touch Panel allows for the system overall. They are not necessarily cleaning and instructional videos to be tied to what kind of machines are installed. For uploaded for viewing by the operator.