Before Installation; Unpacking; Optional Accessories - Austin Hughes Electronics CyberView RP-615 User Manual

1.3 Before Installation

■
It is very important to locate the Rackmount LCD Drawer / Display in a suitable environment.
■
The surface for placing and fi xing the Rackmount LCD Drawer / Display should be stable and level or mounted into a
suitable cabinet.
■
Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
■
Convenience for connecting the Rackmount LCD Drawer / Display to the related facilities should be well considers
too.

1.4 Unpacking

The Rackmount LCD Drawer / Display comes with the standard parts shown on the package contents. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.

1.5 Optional Accessories

1. Power Cord
1.1 IEC power cord
1.2 NEMA 5-15 power cord (US)
1.3 BS 1363 power cord (UK)
1.4 CEE 7/4 power cord (German)
1.5 AS 3112 power cord (Australia)
P.3
Chapter 1