Maintenance - Magic 105 Manual

G
B
SAFETY CLUTCH ADJUSTMENT
Lift the cover of the box to reveal the adjuster screw of the mechanical clutch located on top
of the speed reducer casing (Fig. 14).
Remove the black protective cap, release the lock nut, and rotate the screw clockwise to
increase the force transmitted by the motor to the gate.
The adjustment should be made in such a way as to obtain a force marginally greater than
that effectively required to set the gate in motion.
N.B.: More force you set on the motor clutch, less reversibility you obtain from the operator.

MAINTENANCE

To be undertaken by specialized staff after disconnecting power supply.
- Make certain that moving parts located inside the box are greased once a year, and check
the force transmitted through the drive to the gate.
- The motor should be overhauled every two years and the oil replaced. In the event that the
need for servicing or repairs should arise, the speed reducer can be removed from the box
without taking down the gate.
- Lift the cover from the box, isolate the motor from the power supply by disconnecting the
cable, then remove the curved lever: the gate can now swing freely.
- Thereafter, loosen the four nuts which secaure the fixing plate to the box and serve to
clamp the speed reducer in position (Fig.15-A/B).
ELECTRICAL SAFETY DEVICES
The installation must be installed according to the current regulations and laws. Use the T2
(for one or two single-phase motors) electronic control unit. For connections and technical
data of accessories refer to the appropriate booklets.
ACCESSORIES
For the connections and the technical data of the optional equipments follow the relevant handbooks.
FOUNDATION BOX FOR MAGIC 110°
ELECTRIC LOCK
Horizontal lock - right external view - 12Vac
Horizontal lock - left external view - 12Vac
Vertical lock - 12Vac
FOUNDATION BOX FOR MAGIC 180°
code ACG8402
MECHANICAL BOLT
code ACG8660
For 2-leaf gates to latch closed gate to the ground.
code ACG8670
code ACG8650
26
14
15
code ACG8412
code ACG5000