Door Removal/Reversal - Electrolux Frigidaire FFFU16F2VV Use & Care Manual

8

DOOR REMOVAL/REVERSAL

IMPORTANT
Before you begin, turn the appliance tem-
perature control to "off" and remove the
electrical power cord from the wall outlet.
Remove any food from door shelves.
1. Using an 8 mm socket with a ratchet
(not supplied), remove the right top
hinge cover and unsnap the alarm
board; leave the alarm board and wir-
ing attached to the unit. Remove the
top hinge from the right side. Remove
the decorative hinge on the left side.
2. Remove the hinge pin from the right
side hole and reinstall it on the left
side hole on the top hinge using an
adjustable wrench.
3. With a flat head screwdriver gently
pry upward on hinge pin bearing to
remove from the door. Reinstall on
the opposite side of the door.
4. Remove the door and lay flat on a
padded surface. Remove the door stop
plate at the bottom of the door, and
reinstall on the opposite side of door.
5. Lay freezer on its back on a
padded surface.
6. Unscrew the right adjustable leveling
foot (A). Remove the 4 screws (B)
holding the bottom hinge (C) to the
cabinet with an 8 mm socket with
ratchet. Screw the adjustable leveling
foot back into the cabinet hole (D).
Bottom of Unit
B
A
Bottom of Unit
x4
Bottom
C
D