Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (indicator light
rapidly flashing).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the reset button for 5 seconds until the indicator light
is rapidly flashing
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Home Security >
Cameras).
7.
Ensure that the device is in pairing mode, with the indicator light rapidly flashing,
and tap "Confirm light is rapidly flashing".
Advertisement
