Reading Tuning Values From The Phone; Reading Rssi And Agc Pdm Values From The Phone - Nokia RH-10 Series Troubleshooting Manual

RH-10
Troubleshooting

Reading Tuning Values from the Phone

Open the "Batch Tune" dialog box, shown here. To read the tuning values from the phone,
click the Read All button under the Phone heading. However, if you want the tuning val-
ues to be displayed, you must first load the template file by clicking the Load File but-
ton, which is located under the Parameter File heading.
Note: Ensure that the template file used is appropriate for the software version in the phone.

Reading RSSI and AGC PDM Values from the Phone

Open the "AGC Status" dialog box. Check the "Enable Trace" box. RSSI is the value near
the antenna on the receiver side. The AGC PDM values are shown beside their respective
variable gain amplifier in the block diagram. The TX AGC PDMs are, as shown in the fol-
lowing diagram from right to left, IF_AGC, RF_AGC, PA_AGC.
Page 34
Nokia Corporation
CCS Technical Documentation
Confidential Issue 1 09/2002