Scan Operation; Watch Operation - Oricom MX300 Instruction Manual

◆ Scan Operation

■
Set scan resume timer in the menu mode.
1. Enter " " menu item to select Scan, exit menu mode to start Normal
Scan or Priority Scan.
• "SCAN" flashes on LCD.
• "16" appears on the sub channel readout during priority scan.
• The scan pauses when a signal is received (The resume time can be
set in the set mode).
• Channel 16 is monitored in priority scan.
• Press [▲] or [▼] to change the scan direction.
2. Press [MENU] key again, or press [PTT]/[C/16]/[

◆ Watch Operation

■
This radio contains Dual/Tri Watch, this can be selected in the menu.
Dual watch: Watch and monitor current channel and Channel 16.
Tri watch: Watch and monitor current channel, Channel 16 and CALL Channel.
1. Enter " " menu to select Watch, exit menu mode to start Dual Watch
or Tri Watch.
• "DUAL" flashes during Dual Watch; "TRI" flashes during Tri watch.
(must select Dual or Tri watch in menu)
• A "BEEP" sound emits when signal is received on Channel 16.
• Tri Watch switches to Dual Watch when signal received on CALL
Channel.
2. Press [MENU] key, or press [PTT]/[C/16]/[
] to stop scanning.
] to stop watch and monitor.
9