Advertisement
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY.
This Instruction Manual Contains
Important Safety Information.
Read THIS INSTRUCTION MANUAL
Carefully and understand ALL
INFORMATION Before Operat-
ing THIS Tool.
• Always operate, inspect and maintain this
tool in accordance with American Nation-
al Standards
Institute Safety Code of Portable Air Tools
(ANSI B186.1) and any other applicable
safety codes and regulations.
• For safety, top performance and maximum
durability of parts, operate this tool at 90
psig 6.2 bar max air pressure with 3/8"
diameter air supply hose.
• Always wear impact-resistant
eye and face protection when oper-
ating or performing maintenance
on this tool. Always wear hearing
protection when using this tool.
• High sound levels can cause
permanent hearing loss. Use hear-
ing protection as recommended
by your employer or OSHA reg-
ulation.
• Keep the tool in efficient operat-
ing condition.
• Operators and maintenance personnel
must be physically able to handle the bulk,
weight and power of this tool.
• Air under pressure can cause
severe injury. Never direct air
at yourself or others. Always turn
off the air supply, drain hose of
air pressure and detach tool from
air supply before installing, removing or
adjusting any accessory on this tool,
or before performing any maintenance
RL200
RL200manual.indd 2
▲ WARNING!
!
use quick detach couplings at tool. See instruc-
tions for correct set-up.
• Air powered tools can vibrate in use. Vibra-
tion, repetitive motions or uncomfortable posi-
tions over extended periods of time may be
harmful to your hands and arms. Discontinue
use of tool if discomfort, tingling feeling or pain
occurs. Seek medical advice before resuming
while operating air tools can be a major cause
of serious injury or death. Be aware of excess
hose left on the walking or work surface.
• Keep body working stance balanced and firm.
Do not overreach when operating the tool.
• Anticipate and be alert for sudden changes in
motion during start up and operation of any
power tool.
• Do not carry tool by the hose. Protect the hose
from sharp objects and heat.
• Do not lubricate tools with flammable or vola-
tile liquids such as kerosene, diesel or jet fuel.
• Don't force tool beyond its rated capacity.
• Do not remove any labels. Replace
labels.
2
on this tool. Failure to do so could
result in injury.
Whip hoses can cause serious inju-
ry. Always check for damaged,
frayed or loose hoses and fittings,
and replace immediately. Do not
use.
•
Place the tool on the work
before starting the tool.
• Slipping, tripping and/or falling
damaged
Rev. 04/22/02
10/4/04 4:22:23 PM
Advertisement
