Table of Contents
Advertisement
Available languages
Available languages
1 .
GENERAL
1.1. CONTENTS
1.
General
2.
Fundamental safety instructions
3.
4.
5.
Identification
6.
Installation, assembly, commissioning
7.
8.
9.
Ending operation
10.
11.
Redelivery
12.
These pure gas components are precision instruments of superior quality. The individual components are
coordinated with each other and allow the flexible configuration of high-quality pure gas supply systems. The
use of selected materials, high-quality surface finishing
and excellent leak tightness ensure that the pressure and flow of even the purest gases can be
controlled with constant precision without contamination of purity. All of the steps involved - from design to
manufacture to final quality inspection - must meet the strict criteria of our quality assurance program accord-
ing to DIN EN ISO 9001.
1.3. 1.3 FIELD OF APPLICATION
These operation instructions is exclusively valid for pressure device of the manufacturer. The products are to
be identified by type plates, manufacturer labels at the handling elements or imprints at the pressure guid-
ing parts. Pressure device in this sense are containers, tubes, and device like pressure regulators, valves,
rupture disks and so on.
This pressure guiding device can also be integrated into pressure supply installations. In this case specifically
designed operating instructions are valid together with this operating instructions.
2 .
FUNDAMENTAL SAFETY INSTRUCTIONS
2.1. INFORMATION IN THE OPERATING INSTRUCTIONS
The essential information which is required for safe operation of the pressure device is contained in these
operating instructions. The safety instructions must be observed by all persons who work on the fittings. Ad-
ditionally, the rules and regulations which apply at the operating location must be observed.
2.2. OBLIGATION ON OPERATING AUTHORITY
The operating authority undertakes to allow only such persons to work on the pressure device who
•
are familiar with the fundamental regulations concerning occupational safety and accident prevention, and
who always have access to these regulations, and
•
have read and understood the chapter on safety and the warnings in these operating instructions and
•
have been trained, and introduced to the pressure guiding device.
•
Safety-conscious working of personnel is to be checked at regular intervals.
•
Responsibility of personnel for assembly, start-up and operation must be clearly defined.
•
Trainees must only work on the pressure device under supervision by an experienced person.
•
All information on safety and danger must always be kept in a legible condition. Geräten arbeiten.
Before starting work, all persons who are instructed to work on the pressure device undertake to
•
observe the fundamental regulations concerning occupational safety and accident prevention,
•
familiarize themselves with the safety data sheet for the type of gas being used.
2.4. DANGERS ASSOCIATED WITH HANDLING OF THE PRESSURE DEVICE
The battery or station pressure regulator (pressure device) is constructed according to state-of-the-art and
recognized safety rules. Despite this, use of the device can cause danger to life and limb of the user or third
parties, or damage to the pressure device or other property.
•
The pressure device must only be used for the intended use.
•
Malfunctions which could impair safety must be rectified immediately.
13/44
EN
Advertisement
Chapters
Table of Contents
