3. Operating your thruster
GB
NOTE: Refer to the main thruster manual for
control options.
•
Please ensure that you thoroughly understand
the operation and safety requirements of the
thruster.
4. Servicing your thruster
NOTE: Stern thrusters are more likely to attract
'debris',so it is necessar y to regularly check
the tunnel.
At the annual boat ser vice.
•
Remove any debris from tunnel, prop and hub.
•
Replace the anode.
•
If the prop is damaged or heavily contaminated,
replace it, best to be safe.
•
Inspect motor, ensure all leads are still tight.
•
Check all bolts and nuts are to correct torque.
•
Check the motor assembly is dry and that the
compartment is water tight.
•
Check stern tube for cracks or damage.
•
Check and clean out thruster compartment.
Electric/Hydraulic Stern Thruster
14
Models 185TT, 250TT & 300TT
Fig. 3.11
Your thruster should not be operated close to
swimmers, as a powerful suction of water is
generated when in use.
Electric/Hydraulic Stern Thruster
Models 185TT, 250TT & 300TT
GB
15