Advertisement
KEYLESS ENTRY
1. The Lock button on the transmitter is used to lock the vehicle's doors,
the Unlock button is used to unlock the vehicle's doors. To lock or unlock
the doors simply press and release the desired function button one time.
As a keyless entry unit, for your convenience, the parking lights will
flash once when the doors are locked and twice when the door are
unlocked.
REMOTE CAR FINDER
The Lock or Unlock buttons are also used to access the car finder
mode. This feature is particularly useful in a crowded parking lot
where finding your car may be difficult. To access the car finder
mode, while within range of your car, simply press and hold either
the lock or unlock button of your transmitter for three seconds.
The parking lights will begin to flash making your vehicle more
visible. The lights will stop automatically after 30 seconds. If
you wish to turn off the car finder mode prior to the expiration of the 30 second timer,
press and release either the lock or unlock button of your transmitter one time
REMOTE TRUNK RELEASE
If you have electric trunk release in your vehicle and the remote trunk release option was
added to your vehicle, simply press and hold the Trunk/Key button of your keychain
transmitter for 3 seconds or until the electric trunk of your vehicle opens.
.
REMOTE STARTING THE VEHICLE
The system will not start the vehicle if any one of the following situations exists;
The vehicle's hood lid is opened.
The gear shift selector is not in Park.
The brake pedal is depressed.
The safety control switch is in the Off position.
1. To start the vehicle, press and release the Trunk/Key button two times within 2
seconds. The vehicle will start and remain running for the pre-programmed 5,10,15,20
minute run cycle. As a visual indication, the parking lights will flash or remain on
depending on the setting by your installation center.
2. When you arrive at the vehicle, turn the ignition key to the ON position (not the spring
loaded start position), then step on the brake pedal to disengage the remote
starter. The vehicle will continue to run, but now on it's own power.
NOTE: The engine will stop running before the pre-programmed run
cycle has expired if you perform any one of the following
functions;
-Press and release the Trunk/Key button on the keychain
transmitter two times within 2 seconds.
-Depress the brake pedal.
-Open the vehicle's hood
-Move the safety control switch to the Off position.
Flashlight Button:
The one way transmitter has a flashlight built into the unit for your
convenience. Simply press the flashlight icon button of your
transmitter to cause the LED on the end of the transmitter to light.
The light will turn off when the button is released.
Caution! Always point the light away from you and the eyes of
others. This is a bright high intensity LED which should not be directed to-
ward or into the eyes of anyone.
2
128-7409
2 of 8
Advertisement
