Options; Before First Use - Atag VA46309AT User Manual

OPTIONS

Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you select
non compatible options, the
appliance automatically
deactivates one or more of
them. Only the indicators of the
still active options are on.
Extra Hygiene
This option provides better hygiene results
by keeping the temperature at 70 °C for at
least 10 minutes during the last rinsing
phase.
How to activate Extra Hygiene
Press , the related indicator comes on
If the option is not applicable to the
programme, the related indicator does not
come on or it flashes quickly for a few
seconds and then goes out.
The display shows the updated
programme duration.
Extra Dry
Activate this option to boost the drying
performance. With Extra Dry on, the
duration of some programmes, water
consumption and the last rinse
temperature can be affected.
Extra Dry is a permanent option for all
programmes other than Eco 50° and need
not to be selected at every cycle.

BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If not,
In the other programmes the setting of
Extra Dry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any time.
Every time Eco 50° is
activated, Extra Dry is off and
needs to be chosen manually.
Activating Extra Dry deactivates Time
Saver and vice versa.
How to activate Extra Dry
Press . The related indicator comes on.
If the option is not applicable to the
programme, the related indicator does not
come on or it flashes quickly for a few
seconds and then goes out.
The display shows the updated
programme duration.
Time Saver
This option increases the pressure and
the temperature of the water. The washing
and the drying phases are shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
How to activate Time Saver
Press , the related indicator comes on.
If the option is not applicable to the
programme, the related indicator does not
come on or it flashes quickly for a few
seconds and then goes off.
The display shows the updated
programme duration.
adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
11