Table of Contents
Advertisement
10
• The indicator
• The display shows the current
setting:
= the rinse aid empty
notification is activated (factory
setting).
2. Press
to change the setting.
= the rinse aid empty notification is
deactivated.
3. Press on/off to confirm the setting.
Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
Make sure the appliance is in user mode.
1. Press
.
• The indicators
off.
• The indicator
• The display shows the current
setting:
–
= Acoustic signal off.
–
= Acoustic signal on.
2. Press
to change the setting.
3. Press on/off to confirm the setting.
AirDry
AirDry improves the drying results with
less energy consumption.
still flashes.
,
and
are
still flashes.
During the drying phase, the
door opens automatically and
remains ajar.
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding Rinse & Hold.
To improve the drying performance refer
to the Extra Dry option or activate AirDry.
CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press
.
• The indicators
off.
• The indicator
• The display shows the current
setting:
= AirDry activated.
2. Press
to change the setting:
AirDry deactivated.
3. Press on/off to confirm the setting.
,
and
are
still flashes.
=
Advertisement
Table of Contents
