Download Print this page
Mastervolt MLI Ultra 12/1250 Quick Installation
Hide thumbs Also See for MLI Ultra 12/1250:

Advertisement

Quick Links

Quick installation
This Quick installation guide provides a brief overview of a basic stand-alone
1
installation of the MLI Ultra 12/1250 & 24/1250. Always read the complete user
and installation manual in parallel with this quick start guide. Scan the QR
code to download the manual.
All electrical systems (DC and AC) must be disconnected from any power source during the entire
2
installation! Use isolated tools!
Always avoid short circuits, too deep discharges, and too high charge currents.
Always handle with care and lift the battery at the handle.
Never open or dismantle the battery and do not short circuit.
The Material Safety Data Sheet for Mastervolt Lithium-Ion batteries is available on www.mastervolt.com.
Read the safety instructions (chapter 1 of the user and installation manual).
3
Open the box. Before taking the battery out, take out the handle and insert it into the recess on the back and front side
of the battery (item a in drawing) to secure it. Now take out the battery.
b
f
g
h
4
Check the contents of the delivery. Contact your supplier if one of the items is missing. Do not use the MLI Ultra if it is
damaged.
Advanced Systems Group EMEA
P.O.Box 22947, NL-1100 DK Amsterdam, The Netherlands.
MLI Ultra 12/1250 & 24/1250
c
i
j
e
a
d
a)
Provision for removable handle.
b)
M8 positive terminal
c)
M8 negative terminal
d)
Hold down edges group 31, fit battery group size 49
e)
Attachment strap support (for stationary applications only)
f)
Protective vent; maintain adequate ventilation around this
opening. Do not touch the membrane!
g)
Auxiliary connector
h)
MasterBus/CZone connectors
i)
Status LEDs and DIP switch cover
j)
Battery switch-button (safety disconnect)
Email: info.emea@OneASG.com
A. 1x MLI Ultra battery
B. 2x plain washer
C. 2x spring washer
D. 2x battery terminal M8 bolt
E. 2x battery terminal M8 Allen bolt
F. 1x automotive battery pole positive
(thick)
G. 1x automotive battery pole negative
(thin)
H. 1x MasterBus terminator
I. 1x MasterBus cable (1m)
J. 1x CZone Drop cable (1m)
K. 1x 6p auxiliary cable (2m)
L. 2x Mounting straps
M. 1x Handle
N. 1x Quick installation manual
Web: www.mastervolt.com 10000018507/00
English

Advertisement

loading
Need help?

Need help?

Do you have a question about the MLI Ultra 12/1250 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mastervolt MLI Ultra 12/1250

  • Page 1 English This Quick installation guide provides a brief overview of a basic stand-alone installation of the MLI Ultra 12/1250 & 24/1250. Always read the complete user and installation manual in parallel with this quick start guide. Scan the QR code to download the manual.
  • Page 2 Quick installation MLI Ultra 12/1250 & 24/1250 English Secure the battery in place. Choose the option that best fits the position. 11 mm 0.4 inch Mounting straps Hold-downs on long side (group 49) Frame or tray (stationary applications only) Make sure that the charger is Lithium Ion compatible and meets the MLI Ultra's charge parameters.
  • Page 3 Quick installation MLI Ultra 12/1250 & 24/1250 English Due to the Interrupt Rating, use a T-fuse or an MRBF fuse. In our example we use an MRBF fuse. Directly on the battery terminal ( mount an MRBF fuse holder (...
  • Page 4 MasterBus communication MasterBus powering disabled MasterBus powering enabled Event-based 'stop charge' can be setup per charger Automatic 'stop charge' for ALL Mastervolt chargers In a multiple unit configuration, one battery is Stand-alone unit the Primary unit, the others are called replica Replica unit units.

This manual is also suitable for:

Mli ultra 24/1250