ECS P4ITA2 Manual page 28

The system can be turned off with a software
Wake Up on
command. If you enable this item, the system
Ring
can automatically resume if there is an incom-
ing call on the Fax/Modem. You must use an
ATX power supply in order to use this feature.
The system can be turned off with a software
Wake Up on
command. If you enable this item, the system
LAN
can automatically resume if there is an incom-
ing call on the Fax/Modem. You must use an
ATX power supply in order to use this feature.
The system can be turned off with a software
Wake Up on
command. If you enable this item, the system
PME#
can automatically resume if there is an incom-
ing call on the Fax/Modem. You must use an
ATX power supply in order to use this feature.
Use this item to do wake-up action if inserting
the PCI card.
If you enable this item, you can turn the sys-
Keyboard
tem on and off by pressing hot keys on the
Power On
keyboard. You must enable the Keyboard
Function
Power On jumper and use an ATX power
supply in order to use this feature.
The system can be turned off with a software
Resume By
command. If you enable this item, the system
Alarm
can automatically resume if there is an incom-
ing call on the Fax/Modem. You must use an
ATX power supply in order to use this feature.
The system can be turned off with a software
RTC Alarm /
command. If you enable this item, the system
Date / Hour /
can automatically resume at a fixed time
Minute / Se c-
based on the system's RTC (realtime clock).
ond
Use the items below this one to set the date
and time of the wake-up alarm. You must use
an ATX power supply in order to use this fea-
ture.
24