Related Manuals for Dormakaba 8900 SIS
Summary of Contents for Dormakaba 8900 SIS
- Page 1 8900 SIS, SISJ, SISH, SISJH Spring stop arm for regular and top jamb mount with hold open (SISH, SISJH) Installation instructions 08279451 – 09-2019 | EN |...
-
Page 2: Table Of Contents
8900 SIS, SISJ, SISH, SISJH Installation Instructions Table of Contents Table of contents 1 Technical specifications Overview Tools recommended Handing the door Installation - regular mount Installing the surface closer Surface closer components Securing main arm to door/frame Securing main arm to closer... -
Page 3: Technical Specifications
8900 SIS, SISJ, SISH, SISJH Installation Instructions Technical specifications 1 Technical specifications Overview Caution: sex nuts are required for attachment of Know the swing of the door which is being components to unreinforced doors and to wood installed prior to installation. -
Page 4: Installation - Regular Mount
8900 SIS, SISJ, SISH, SISJH Installation Instructions Surface closer system Regular mount 1.4 Surface closer components The surface closer is comprised of the following components. Backcheck adjustment Cover Optional backplate Pinion Damper assembly Delayed action adjustment 10. Main arm Latch speed adjustment 11. -
Page 5: Securing Main Arm To Door/Frame
8900 SIS, SISJ, SISH, SISJH Installation Instructions Regular mount 2.2 Securing main arm to door/frame Fig.3 Hold open Damper plate Adjusting Right Hand (RH) Left Hand (LH) tube Configuration Configuration 7/8"x1/2" Plate pointing to the Plate pointing to the... -
Page 6: Instructions - Top Jamb Mount
8900 SIS, SISJ, SISH, SISJH Installation Instructions Top jamb mount Instructions - top jamb mount 3.1 Mounting backplate/top plate (BP89) Fig.5 Left hand door shown NOTE: Backplate is required for frames under 3” in 3.1.1 Secure plate to frame. -
Page 7: Securing Main Arm To Door/Frame
8900 SIS, SISJ, SISH, SISJH Installation Instructions Top jamb mount 3.3 Securing main arm to door/frame Fig.7 7/8"x1/2" torx head shoulder bolt Adjusting tube Damper Left Hand (LH) Right Hand (RH) Configuration Plate Configuration Plate pointing to the LEFT... -
Page 8: Adjustments
8900 SIS, SISJ, SISH, SISJH Installation Instructions Adjust closing speeds Adjust hold open Covers Adjustments Confirm closer spring size prior to making any Maximum opening angle is 110º. closing speed adjustments. Door should close in 3 to 6 seconds from 90º. - Page 9 DORMA USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...
Need help?
Do you have a question about the 8900 SIS and is the answer not in the manual?
Questions and answers