Surface applied closer super parallel arm mount 180 swing (to clear the hinge) (8 pages)
Summary of Contents for Dormakaba 8900 AF89P x PFT
Page 1
8900 AF89P x PFT Parallel arm mount with parallel flush transom bracket and drop plate (DP89) Installation instructions 08279761 – 09-2019 | EN |...
8900 AF89P x PFT Installation Instructions Table of Contents Table of contents 1 Technical specifications Overview Tools recommended Handing the door Instructions - parallel mount Installing drop plate and surface closer Installing parallel flush transom bracket Installing and securing connecting arm...
8900 AF89P x PFT Installation Instructions Technical specifications 1 Technical specifications Overview Hold open range is from 30° to 140° with Caution: sex nuts are required for attachment optional hold open kit. of components to unreinforced doors and to...
8900 AF89P x PFT Installation Instructions Surface closer and drop plate Secure flush transom bracket Secure connecting arm Instructions - parallel mount 2.1 Installing drop plate and surface closer Fig.2 Pinion 2.1.1 Reference template 08279762 and 2.1.3 Secure closer body.
8900 AF89P x PFT Installation Instructions Main arm 2.4 Securing main arm Fig.5 Pinion 2.4.1 With main arm parallel to door, place main arm screw onto top of pinion. 2.4.2 Secure with pinion screw and 6mm hex key. Pinion...
8900 AF89P x PFT Installation Instructions Adjust closing speeds Adjustments Confirm closer spring size prior to making any Maximum opening angle is 180º. closing speed adjustments. Door should close in 3 to 6 seconds from 90º. Do not back valve heads out beyond closer casting.
8900 AF89P x PFT Installation Instructions Adjust spring force Secure covers 3.2 Adjust spring force Fig.7 8916 - supplied with a size 4 8956 - supplied with a size 6 Increase 8916 ONLY - Barrier free openings: Take an opening Decrease force reading from the pull on the door.
Page 8
DORMA USA, Inc. T: 800-523-8483 www.dormakaba.us...
Need help?
Do you have a question about the 8900 AF89P x PFT and is the answer not in the manual?
Questions and answers