Advertisement
Table of Contents
Requirements
In order to update the firmware, you will need:
1.
a PC running the "Manfrotto Firmware Update GUI" software, and having a USB port available
2.
a standard mini USB cable (not supplied) to connect the remote control and computer.
The cable must be mini-B male to A male.
Firmware Update procedure
Manfrotto MVR911ECCN
Advertisement
Table of Contents
Related Manuals for Manfrotto MVR911ECCN
Summary of Contents for Manfrotto MVR911ECCN
- Page 1 Requirements In order to update the firmware, you will need: a PC running the “Manfrotto Firmware Update GUI” software, and having a USB port available a standard mini USB cable (not supplied) to connect the remote control and computer. The cable must be mini-B male to A male.
- Page 2 Description This document describes the firmware update procedure for the Manfrotto MVR911ECCN remote control. Download Visit www.manfrotto.com and find the relevant update file (*.upg) for your device. Download the file to your PC, ready for step 4. Update Procedure Turn the Remote Control on in Update Mode, as follows: •...
- Page 3 Wait until the PC has identified the device correctly and confirmed that it is ready for use. run the Manfrotto Firmware Update GUI software on the PC click the “…” button (highlighted in red below) to navigate to the update file (*.upg) you saved on your PC. click the “Update” button to start the procedure (this button is enabled only after the *.upg update file has been loaded, and only if a compatible remote control unit is properly connected to the PC) When the update file has been successfully applied and the procedure has finished, a confirmation dialog box will appear.
- Page 4 Error: unexpected exception while One or more unexpected errors have Try repeating the update procedure programming happened while downloading the from the start firmware to the remote Please try again MVR911ECCN update_rev 1.2 Copyright © 2012 Manfrotto Bassano Italy - 4 -...
Need help?
Do you have a question about the MVR911ECCN and is the answer not in the manual?
Questions and answers