Operation Instructions; Setting The Clock - Galanz GSWWD09S1A09A User Manual

OPERATION INSTRUCTIONS

Setting the Clock

You can set the clock in 12-hour or 24-hour by pressing
CLOCK/TIMER in standby mode.
Example: How to set a 12-hour clock at 11:58.
1
In standby mode, press and hold
CLOCK/TIMER for 3 seconds to
select 12-hour clock (press the pad
again to select 24-hour clock).
2
Press +/- until the correct hour is
displayed.
or
3
Press START or CLOCK/TIMER to
confirm the hour.
or
4
Press + / - until the correct minute is
displayed.
or
5
Press START or CLOCK/TIMER to
confirm the minute and finish setting.
or
NOTE: While in the process of setting the clock, you can cancel
the settings by pressing the STOP/CANCEL.
9