Initial Setup - Audiovox Maestro User Manual

Chapter 2: Basic Skills

Initial Setup

When using the Maestro for the first time, carry out initial setup according to the procedures below
after a built-in battery has been charged.
1. Press the power button to turn the power on. The welcome screen appears. Tap the screen to
start the following setup.
2. Execute touch screen correction.
When the align screen appears, tap the center of the cross target with the stylus. The next
target position changes upon tapping the target. Five taps completes the positioning correction.
The screen then changes to the stylus screen.
• If a finger or any other object touches the screen during correction, the correction will be
canceled. Repeat the correction procedure.
3. Read how to use the stylus.
• Read and understand the stylus operation, and then tap Next.
Note
For more information on stylus operation, see "How to Use Stylus" of Chapter 2.
4. Learn the pop-up menus operation.
• Read the on-screen explanation and then operate the screen.
Display the pop-up menus, and cut and paste the data according to the screen instructions.
• When you finished the paste operation, this stage is completed. Tap Next.
5. Set the location.
• When tapping the right M mark, the city and time zone list appears. Tap the desired city and
time zone.
• When the setup is completed, tap Next.
6. To complete the initial setup.
• When the complete screen appears, the initial setup is completed.
• After tapping the screen, you can use the Maestro.
Note
When you tap the Complete screen, the Today screen appears. For more information on
the Today screen, see "Today screen" of Chapter 2.
11