Battery Charging - Audiovox Maestro User Manual

Chapter 2: Basic Skills

Battery Charging

A built-in battery is installed in the Maestro. When using the Maestro for the first time, set the
battery switch at the supply side, then charge the built-in battery with the supplied AC Adapter.
How to Charge Battery
You can use two charging methods.
When you connect the AC Adapter and the Maestro, turn the unit off.
• Connect the supplied AC Adapter and the cradle as shown in the figure below, and then insert
the Maestro into the cradle.
• Connect the supplied AC Adapter and the Maestro as shown in the figure below.
Note For charging the built-in battery, maintain an ambient temperature from approx. 5°C (41°F)
to 35°C (95°F). If the ambient temperature is too low or too high, the charging will pause.
According to the operating status, the charging may pause even when the ambient
temperature is below 35°C (95°F). The flashing in yellow of the Alarm Lamp LED indicates
the pause of the charging.
The lamp is lit in orange during the built-in battery charging.
When the built-in battery is completely charged, the Alarm Lamp LED color changes to
green.
Charge time is dependent on the ambient temperature.
Charging time to fully charge the built-in battery for the first time or when completely
drained is approximately 4 hours.
9