Working Instruction, Mechanical
4.1.3 PBA Unit
Place the top of the PBA unit into the top of the frame (1)
and then lower the bottom part (2) until the PBA unit rests
on the inside of the frame.
U
!
SE NEW SCREWS
Apply 17 Ncm when tightening two long screws at the
bottom and two short screws at the top of the phone using
torx bit no. 6.
3/000 21-1/FEA 209 544/124 A
42(45)
©
Company Internal
Sony Ericsson Mobile Communications AB