Table of Contents
Advertisement
I N S TA L L AT I O N I N S T R U C T I O N S
INSTALLATION PREPARATION
Before beginning the installation of your
fully read the following installation
rangehood, the method of ducting should be
eginning the installation of your oven.
considered and selected. The guide below
illustrates the various ducting options.
n safety –
Always switch the power off prior to beginning the installation.
–
Stainless steel is very easily damaged during installation. Wherever possible,
This rangehood cannot be operated in
protect the rangehood with the cardboard box or plastic wrap during the
recirculation mode. We recommend to duct
wherever possible.
installation.
–
For safety reasons, this Rangehood must be earthed.
Please follow the below tips on how to correctly
–
A power point must be located within 1.5m of the power cord exit from the
duct your rangehood:
rangehood, and it should be always accessible to allow isolation from power
• Always use correctly sized ducting.
during cleaning or maintenance.
• Do not reduce the size of the ducting.
–
A 150mm round ducting adapter is supplied, however all other ducting
• Always use solid ducting.
accessories are not.
• Always use non-flammable ducting.
–
All ducting must comply with building codes and local requirements.
• Always duct to the outside atmosphere.
–
If you are re-circulating the air, rather than ducting, please ensure that the side
• Do not use flexible ducting.
outlet grilles are not obstructed in any way as this will effect the effi ciency of
• Do not duct into the ceiling space.
Always vent to the outside atmosphere.
the rangehood.
• Avoid sharp 90 degree bends as much
–
Ensure that the rangehood is mounted in a level position, both horizontally
as possible. Use 45 degree bends instead
and vertically. This is essential to ensure the rangehood operates correctly and
wherever possible.
prevents grease build up at one end.
• Duct to the outside atmosphere using the
shortest duct run possible.
Before beginning the installation of your rangehood, the method of ducting should be
• Use cylindrical ducting whenever possible.
considered and selected. The guide below illustrates the various ducting options.
Ducting Options
Note: This rangehood can be operated in recirculation mode where required,
This rangehood cannot be operated in recirculation mode,
This rangehood cannot be operated in recirculation mode,
1. Into your ceiling cavity and then vented
although Airvolution recommends to duct wherever possible.
Residentia Group recommends to duct wherever possible.
Residentia Group recommends to duct wherever possible.
through your eaves.
1.
Into your ceiling cavity and then vented through your eaves.
considered and selected. The guide below illus
considered and selected. The guide below illus
Note: This rangehood can be operated in reci
This rangehood cannot be operated in re
This rangehood cannot be operated in re
Note: This rangehood can be operated in reci
This rangehood cannot be operated in re
This rangehood cannot be operated in re
although Airvolution recommends to du
Residentia Group recommends to duct w
Residentia Group recommends to duct w
although Airvolution recommends to du
Residentia Group recommends to duct w
Residentia Group recommends to duct w
2. Straight up and through your tiled
1.
Into your ceiling cavity and then vented
or metal roof.
1.
Into your ceiling cavity and then vented
2.
Straight up and through your tiled or me
3. Through your wall.
2.
Straight up and through your tiled or me
11
7
7
Advertisement
Table of Contents
