Configuring The Usrid-16W For Logging; Standard Configuration Options - LogTag Recorders USRID-16W Product User Manual

Configuring the USRID-16W for
logging

Configuring the USRID-16W for logging

Each USRID-16W model is delivered to you pre-configured with the prescribed WHO
recording profile, ready to be started.
The display is off. Briefly pressing the
Although the logger is already configured, you can make a limited number of adjustments
to the configuration. These include:
Adding a description, which will show on the PDF report
l
Changing the appearance of the PDF report
l
Changing the language in which the PDF report will be printed
l
Selecting which files are generated at the end of the trip
l
This is done using LogTag
analyzing data, using the following steps:
Start the LogTag
l
Remove the protective cap from the logger's USB connector, plug it into a USB
l
socket on your computer and wait for the drivers to be installed
From the menu click LogTag - Configure; LogTag
l
configuration options for connected loggers.

Standard Configuration Options

The only parameter in the standard configuration options you are permitted to customize
is the Description.
All other parameters are preset to the requirements of the WHO for shipping indicators:
Start Option: Push Button
Number of days to record:
Recording Interval:
Start delay: 1 hour
3
You can configure more than one USRID-16W at the same time, however it is practical to limit the number of units to about 6,
using a powered USB hub.
USRID-16W User Guide
STOP
®
Analyzer software, which can also be used for downloading and
®
Analyzer software.
20
5 minutes
button shows:
/Review
®
Analyzer will display the
3
.
9