TEFAL Beertender VB310 Manual page 13

Warning! To avoid overheating, keep the Beertender
direct sunlight - fig. 30.
3. Always hold the appliance by the bottom edge when lifting it - fig. 5.
Warning! Do not use the handle or power cord to lift the Beertender
- fig. 31.
Using the Keg
• Make sure that you chill the keg before using it. If you fail to chill the
keg sufficiently too much foam will be produced when you start to pour
beer.
• Please also be aware that the first glass that you pour from every new
keg will contain mostly foam. Draught beer in a bar behaves in exactly
the same way!
• The Beertender
system for storing and dispensing beer. It guarantees beer of higher,
long-lasting quality and a Beertender
pleasant to use.
IMPORTANT: before installing a keg inside the appliance, check the
"best before end" date shown at the bottom of the keg. This date is
a reliable indication if the keg has been stored at room temperature.
• The use of kegs "Compatible Beertender
necessitate the use of beer tubes - fig.7. A bag of tubes is delivered
with the Beertender
after-sales service or the La Bière Pression website. (See details at the
end of this manual).
Warning: contents under pressure. Do not shake or drop. Do
not expose to sunlight or temperatures above 30°C. Even
when the keg is empty, do not force it open and do not
expose to flame or fire.
Keg "Compatible Beertender
®
appliance. To receive additional tubes, contact our
®
" features a patented
®
system that is very easy and
®
" in the Beertender
®
Keg out of
®
®
system
®
13
EN