Audiovox CTX3600A User Manual page 9

Note: Refer to "To Recal;
and "To Review th~
a Number from Memory
?refix" for more details.
II
Silent Incoming Calls
This feature alerts you visually of an incoming call by
flashing ;,GALL on the readout instead of hearing
the Alert Tone.
1. Press ~ , key ~ then ~ .The will
appear on the readout
2. When a call is received, the unit indicates it by
on the readout without Alert Tone.
3. answer the call. .
adout will go out
4. This mode is eactivated by pressing ~, key
~ then ~ a
g ain ~ ~ .
5. If the Silent Incoming Calls is activated when the
unit is powered up, will appear on the
readout for 5 seconds.
Silent Alert "Beep" (NAM Option)
Norrriill operation of silent alert is to display the word
"CALL" in the handset display, when a call is being
received, without an obtrusive audible ring signal. If
the user would like to know when a call is being
received, however, still does not want an obtrusive
ring signal, a single "beep" at the beginning of the
call (NAM) will allow the user to know a phone call is
being received.
Any Digit Key Answering
(NAM Option)
This feature permits you to answer an incoming call
by pressing any of the digit keys on the keypad.
Automatic Answering
With this feature, the incoming call will be
automatically connected after two alert tones, and the
\tf4;Q$:E' indicator will appear in the display. At that
point, the unit is ready for Hands-free operation.
1. Press ~ and then key ~ .~will appear in
the display.
2. This mode is deactivated when ~ and then
key ~ are pressed again.
3. This feature will not function if the handset is off the
cradle or if the unit is in the following modes;
1) Locked
2) Automatic Horn Alert
3) Automatic Calls in Absence Indicator
4) Automatic Answer Fax Data
5) Silent Incoming Calls
4. If the Automatic Answering is activated when the
unit is powered up, ~ will appear on the
readout for 5 seconds.
2. Press ~ ' the lJN V~EiJ indicator will light as
the call is placed.
Programmable Emergency Call
(NAM Option)
This feature pennits you to place a call to 3 emergency
numbers (maximum of 7 digits) even if your telephone
has been set to the locked or restricted modes.
The three emergency numbers must be pre-
programmed in the NAM.
Note: !:; , ~ , -~~'T
-'11 IS presel emergency numoer. tyuu ma)
change this number if you wish) .
Operation in Lock Mode
L Enter the emergency call number (911); ;9 ~~
( "911" does not indicate, but the indicator
will light).
2. Press ~ ' the indicator will light.
3. To temlinate the c , e: t), .(The LIfIfc(;jS£j
indicator will go out.)
Operation in Call Restriction Mode
The operation and display are the same as in the
normal mode.
.One Touch Emergency Call
This feature permits you to place a call to an
emergency number by a single keystroke, even when
the unit is in the locked or restricted modes. This
feature can be deactivated to prevent an unintentional
emergency call.
To Place the Emergency Call
Press key ~ for more than 2 seconds. The first
emergency number that is pre-programmed in the
NAMwill be displayed, and l~;U$£l indiCator :wilflight
as a call is placed. The factory pre-set number is 911.
To turn the One Touch Emergency Call
feature on or off
1. Enter your three digit security code.
2. Press the ~ key [I] then !i1.
3. Press the ~key to turn the One Touch Emergency
Call feature on or off.
4. After you have entered the desired on or off status,
press the ~ key then the ~ key.
See also Programmable Emergency Call