Sid Management - Audiovox MVX-480 Series User Manual

To Clear the Timer
1. Press , then enter the three-digit security code.
2. Press , key
"CLEARED" will be displayed for 5 seconds.
The timers will be cleared, and the count for the cumulative talk time will start from zero.
Cellular systems are identified by a number called System Identifier or SID. This feature, which can be programmed by
your carrier or dealer enables you to take advantage of the families of cellular systems (SIDs) that your Carrier owns, or
has special billing arrangements with, in different cities. In Cellular areas which are very closely associated with your
carrier (called brother/sister SIDs) your phone may be billed at the same rate as your "Home" system and your phone's
display will appear the same as when operating in the Home system (i.e. both
display). In areas (called cousin SIDs) where your Carrier has Roaming agreements, your phone will display a steady
" " indication. If your display indicates a flashing "
with your Carrier (you can still make or receive calls). If your display indicates a flashing
change you're A/B System Selection or NAM selection in order to obtain service. If your display indicates a steady
, you are in an area where there is no cellular service.
A/B System Selection
This feature permits you to select the system you need to use. The system that you are registereed with is the preferred
system, and your home system. When you turn the phone on, it remembers the last A/B setting and will scan the radio
frequency channels of that setting.
1. Press , key
2. You can change the current mode by pressing
: Scroll upward
: Scroll downward
Standard Mode
·
The phone will scan the preferred system channels. If unable to find an acceptable preferred channel, the phone switches
to scan the non-preferred channels.
Home Only Mode
·
You can place or receive calls only within your home area.
Preferred System Only
·
The phone will scan the preferred system only and prevents switching over to the non-preferred system.
, .

SID MANAGEMENT

(Programmable Option)
. The current mode will be displayed
", you are in a cellular system which is not associated
or .
and are off in your
, you may have to