Memory Name Tag - Audiovox MVX-480 Series User Manual

2. The indicator will go out.
Note: The unlock code is registered in the programmable option and advised by your dealer when you purcahse the phone.
Volume Control
The audio level of the earpiece and the alert tone can be adjusted by the Volume Control Key
: To increase the sound level.
: To decrease the sound level.
Earpiece volume:
1. Keep pressing or
2. Sound level "H-S VOL X" (X=1~5)" will be the displayed on the readout. You can monitor the sound level with the
sample tone when you are not engaged in a phone conversation.
Alert Tone:
1. Press .
2. Keep pressing or
3. Sound level "ALT VOL X" (X=1~5)" will be displayed on the readout.
This feature permits you to tag an identifying name (up to 5 characters) to each phone number in the memory address. The
name will be displayed each time you recall a number from memory address.
To Enter names using Alpha (Letters)
1. Press
2. Press digit keys repeatedly until the character you need appears. The following table shows which character is assigned
with each digit key.
until you get the desired sound level.
until you get the desired sound level.

MEMORY NAME TAG

. "ALPHA" will appear on the readout to indicate the Alpha Mode is active.
or .