Making And Answering Calls; Making Calls; Answering Calls; Signal Strength - Audiovox CDM-8912 User Manual

Making and Answering Calls

Making Calls

1.
Make sure your phone is on.
2.
Enter a phone number. (If you make a mistake while
dialing, press
hold
3.
Press
Call Guard is enabled, highlight Roam Call, read the
message, select On or Off, then press
4.
When you're finished, press

Answering Calls

1.
Make sure your phone is on. (If your phone is off,
incoming calls go to your voicemail.)
2.
When your phone rings or vibrates, answer the call by
pressing
3.
When you're finished, press

Signal Strength

You can see the strength of your signal by the signal
indicator (
Call quality and signal strength are always best when
the antenna is fully raised (if applicable). If you're
inside a building, being near a window may give you
better reception.
16
to erase one digit at a time. Press and
to erase the entire number.)
. (To make a call when you are roaming and
.
) on your phone's display screen.
.)
or close the phone.
or close the phone.