Using The Battery And Charger; Installing And Removing The Battery; Charging The Battery - Audiovox CDM-8912 User Manual

Using the Battery and Charger

Installing and Removing the Battery

To install, insert the battery into the
opening on the back of the phone
and gently press down until the latch
snaps into place.
To remove, make sure the power is off.
Press the battery release latch up and
remove the battery from the phone at
a 45-degree angle.

Charging the Battery

To use the Travel Charger provided with your phone:
1.
Plug the travel adapter into a standard outlet.
2.
Plug the other end of the travel adapter into the bottom
of your phone, with the battery installed.
It takes approximately 3 hours to fully recharge a completely
discharged battery. We recommend that you recharge the
battery before it becomes completely discharged.
Important Note:
It is vital that you use only Sprint-approved desktop
chargers and AC adapter chargers. Use of unauthorized
accessories could damage your phone and invalidate
your warranty.
15