Table of Contents
Advertisement
In stop mode
CUSTOMIZING THE FUNCTION SETTINGS
(continued)
Others
1. Press the SETUP button.
2. Use
3. Use
4. Use
5. If you want to exit the FUNCTION SETUP MENU and return to the normal screen, press the
Analog Out
6 Channel : Select when connected to a Dolby Digital ready amplifier equipped with 5.1ch
2 Channel : Select when connected to a TV, or Dolby Pro Logic or stereo system via the analog
Digital Out
There will be digital signal.
Note :
• You can adjust the channel balance on your Unit. Please see "ADJUSTING THE SOUND" on
or
button to select Audio, press the ENTER button.
,
,
or
button to select Others, and then press the ENTER button repeatedly to
select Analog Out type.
button to shift and press the ENTER button repeatedly to select the Digital Out type.
RETURN button.
audio inputs (5 speakers and 1 subwoofer).
audio jacks.
• The left / right front speakers are activated only.
page 9.
(continued on next page)
(continued on next page)
(continued on next page)
(continued on next page)
(continued on next page)
Advertisement
Table of Contents
