Community Playthings Peg tree Manual

Peg tree
Recommended Use
The Peg tree provides hanging space for aprons, dress-
ups, hats, bags and extra clothing.
For children 2 to 8 years old.
WARNING
c This product is intended for use by children of immature
judgment, therefore supervision is required at all times.
CAUTION
c For indoor use only. The Peg tree is not waterproof.
Assembly
The Peg tree comes in 2 parts (see figure A): the stand and
the post. To assemble the Peg tree, refer to the following
steps:
1. Insert the slotted end of the post into the stand
2. Tap the stand and post on the floor
3. Ensure that the post is firmly engaged into the stand.
If your shipment is incomplete, please call Customer
Service.
Figure A
IMPORTANT
Retain these instructions for future reference.
© 2005 by Community Products (UK) Ltd
LS25 Eu 0369 Revision 02
Maintenance
Periodically inspect for cracks, breaks, loose parts, missing
parts, and/or malfunctions. Remove the product from service
when any condition develops that might make operation
unsafe.
Construction
The wooden components are manufactured from solid birch
and birch plywood, protected with a child-safe finish.
Cleaning
Wipe with a damp cloth and mild detergent. Dry immediately.
Leaving water or cleaning agent on the surface may damage
the finish.
User Modifications
We cannot be responsible for modifications made by custom-
ers to our products in the field without our supervision, test-
ing, or evaluation.
Ordering Parts
To order replacement parts, contact Customer Service with a
description of the part(s) needed and the ID Code from the
product.
Use only replacement parts supplied by
Community Playthings.
Brightling Road, Robertsbridge, TN32 5DR UK
www.communityplaythings.co.uk sales@communityplaythings.co.uk
Community Playthings
Phone: 0800 387 457