Insignia NS-WFPTCC1 Quick Setup Manual

QUICK SETUP GUIDE
10-Cup Water
Filtration Pitcher
NS-WFPTCC1

PACKAGE CONTENTS

• Water filtration pitcher
• Water filter
• Quick Setup Guide

FEATURES

• Filters chlorine and odors while improving the taste of your drinking water
• BPA-free and NSF42-certified for your safety and peace of mind
• Spout opens automatically to prevent accidental spills
• Ergonomic handle is easy to grip for your comfort
• Filter (included) lasts 90 days or about 200 gallons (757 L) and is easily
replaced (works with NS-WPRF3PK Insignia Replacement Filters)
Before using your new product, please read these instructions to prevent any damage.

INSERTING THE WATER FILTER

1 Soak the filter in cold tap water for 10 minutes to remove bubbles. This will
activate the filter and ensure the best filtration performance before use.
2 Hand-wash the pitcher, lid, and reservoir with a mild detergent.
Note: Do not put it in the dishwasher. Do not use abrasive cleaners. Rinse thoroughly
with water.
3 Insert the filter into the reservoir. Press firmly to make sure that the seal is tight.

USING THE WATER PITCHER

1 Fill the reservoir with cold tap water. Discard the first two reservoirs of water.
2 Press and hold the button on the lid for three seconds until the blue light
flashes to activate the indicator.
Note: Repeat this step after each new filter replacement.

LED INDICATOR STATUS

Press the button on the lid to see the filter indicator status.
After filtering 200 gal. (757 L) of water or when the red smart indicator light is on,
you should change the filter.
STATUS LED
Good Blue stays on for five seconds
Replace soon
Red flashes six times
Replace now Red stays on for five seconds

REPLACING THE SMART INDICATOR

1 Remove the smart indicator by squeezing the clamping jaw and lifting the
indicator away from the lid.
Groove
2 During the re-installation, make sure that the clamping jaw is completely
inserted into the groove.
Notes:
• If the indicator dies, dispose of it according to all applicable provisions and regulations.
• For replacement smart indicators, contact Insignia customer care.
REMAINING DAYS
90 days
10 days
0 days
Indicator
Clamping jaw