Dyson lightcycle CD04 Operating Manual page 7

Hide thumbs Also See for lightcycle CD04:
Table of Contents

Advertisement

6.
If the light is not working as it should, has
received a sharp blow, has been dropped,
damaged, left outdoors, or dropped
into water, do not use and contact the
Dyson Helpline.
7.
If a service or repair is needed, contact
the Dyson Helpline so we can discuss the
available options. Do not disassemble the
light as incorrect reassembly may result in
an electric shock or fire.
8.
Do not handle any part of the light, cable
or plug with wet hands.
9.
Do not use with a damaged cable or plug.
If the supply cable is damaged it must
be replaced by Dyson, its service agent
or similarly qualified persons in order to
avoid a hazard.
10.
Do not stretch the cable or place the
cable under strain. Keep cable away from
heated surfaces.
11.
Do not run cable under carpeting. Do not
cover cable with throw rugs, runners or
similar coverings. Arrange cable away
from traffic area and where it will not be
tripped over.
12.
Do not unplug by pulling on the cable.
To unplug, grasp the plug, not the
cable. The use of an extension cable is
not recommended.
13.
Turn off all controls before unplugging.
Unplug from socket when not in use for
extended periods. To avoid a tripping
hazard, safely coil the cable.
14.
Do not use near furnaces, fireplaces,
stoves or other high temperature
heat sources.
7

Advertisement

Table of Contents
loading

Table of Contents