HOW TO USE THIS MANUAL
EXPLANATION METHOD
1. Operation procedure
Example of description in pattern B
DISASSEMBLY·INSPECTION·REASSEMBLY
• Step Nos. are partially sometimes omitted in
illustrations.
• When a part requiring tightening torque
instruction is not indicated in the illustration,
the part name is described in the illustration
frame.
Disassembly Procedure
1
Remove the cover. [Point 1]
2
Remove the bushing. [Point 2]
3
Remove the gear.
Point Operations
[Point 1]
Explanation of key point for operation with an illustration
Disassembly:
Put a match mark when removing the pump cover.
[Point 2]
Inspection:
Measure the bush inside diameter.
Limit: 19.12 mm (0.7528 in)
Operation explained later
Tightening torque unit T = N·m (kgf·cm) [ft·lbf]
T = 46.1 to 48.1
(470 to 490)
[34.0 to 35.5]
0-5
0