Obihai OBi300 Setup Manual page 5

OBi300 Adapter Setup Guide
Step 1
Connect the OBi300
ATA to the Internet
Step 2
Setup Your ONEplace
Voicemail Password
and PIN
Step 3
Set Your Emergency
Response e911
Location
Step 4
Test Your Line
STEP 4 – TEST YOUR LINE
1. Using the telephone connected to the OBi300 ATA, dial **9 222 222 222 to perform an
echo test.
2. Speak a test phrase into the phone to verify the quality of your internet connection.
Note: you should hear each word immediately echoed back to you. If you do not hear the word or
it sounds garbled, this indicates a network issue.
3. Setup is now complete!
If you are using NEW number(s), your phone is now activated and ready to use. If you are
PORTING your number(s), you must wait until porting is complete to begin using your phone.
Reference your welcome email for porting information.
If you still need assistance with your OBi300 ATA, please open a support ticket through your
AccountView portal.
Page 5 - Version 1.0
Updated 09/06/18