Terminal Mode Operation - Belkin Secure KVM - NIAP PP4.0 Administrator's Manual

Terminal Mode Options
Once authenticated, the following menu opens:
authentication succeeded. please select operation...
0- asset management
1- firmware versions
2- configure dpp
3- configure sc
4- account management
5- reset to factory defaults
6- logs and events
7- configure peripheral devices
8- back
9- exit terminal mode
10- power cycle the KVM
Select any of the options, by typing the number on the keyboard.
Make sure NOT to use the keyboard's numeric pad; it does not work. Only the main keyboard numbers
work.
NOTE:
• To get out of Admin mode, type 8 (as seen in the menu above) or power cycle the KVM switch.
• As long as the unit is in Admin mode, keystrokes are not sent to the target computer.
ADMINISTRATOR GUIDE 8