Download Print this page
Fitness-Mad Studio Pro Rebounder Assembly Instructions

Fitness-Mad Studio Pro Rebounder Assembly Instructions

Advertisement

Quick Links

Assembly Instructions
Thank you for buying a Studio Pro Rebounder. Please carefully remove the Rebounder from the box
and lay it on a smooth, clean floor with the legs facing up. One by one lift each leg, pulling it until
the spring is extended and simply slide over the stud that is attached to the frame. Ensure the leg is
completely seated and then repeat for the remaining legs.
Turn the Rebounder over and adjust the cover so that it evenly covers the springs on both sides and
your Rebounder is ready for use!
Maintenance
Your Studio Pro Rebounder should offer trouble free operation, however, occasionally you may like to
lubricate the springs and their mounting pins with WD40 or similar to minimise the noise when using
your Rebounder.
From time to time it may be necessary to replace a spring. These are covered under Warranty for 6
months and thereafter are available as spares.
Using the Rebounder
Please read the instructions and warnings before using the Fitness-Mad Studio Pro Rebounder.
WARNINGS
Before using the Rebounder, ensure all 6 legs are correctly seated and all the rubber feet
are attached.
Do not over extend the springs inside the legs when setting up for use or putting away for
storage.
Check all the springs are intact and the spring covers are evenly covering the springs.
The Rebounder bed should be free from obstructions and must be dry.
Position the Rebounder on a smooth, flat and solid surface.
Check that there are no lights fixtures/fittings or other obstacles above the Rebounder and
no furniture within 2m of the Rebounder.
Do not use on grass as this can result in damage to the legs and/or frame.
Keep others away from this equipment when in use.
This product should not be used by persons weighing over 125kg.
This Rebounder is designed for Adult use only. If children use this Rebounder there is a risk
that their feet can slip between the springs and potentially result in an injury to the foot, ankle
or leg.
Always wear training shoes with anti-slip soles when using the Rebounder. Ensure that the
laces are tucked in to avoid snagging on the springs. Never use shoes with heels. Barefoot
usage is not recommended as this can result in injuries to the foot, ankle or leg.
Studio Pro 40" Rebounder

Advertisement

loading

Summary of Contents for Fitness-Mad Studio Pro Rebounder

  • Page 1 Assembly Instructions Thank you for buying a Studio Pro Rebounder. Please carefully remove the Rebounder from the box and lay it on a smooth, clean floor with the legs facing up. One by one lift each leg, pulling it until the spring is extended and simply slide over the stud that is attached to the frame.
  • Page 2 We are confident in the build quality and the materials used in the construction of the Studio Pro Rebounder and each Rebounder comes with a limited 6 month warranty. Fitness-Mad warrants the Studio Pro Rebounder for private or light commercial use to be free from defects in materials and workmanship for the period: Frame, Rebounder Bed Springs that attach to the frame &...