Advertisement
increase it as desired. The level will be shown on the display panel
from a minimum BAS -10 to a maximum of BAS 10 (BAS 00
indicates flat response). The display will automatically return to
the normal indication 5 seconds after the last adjustment or when
another function is activated.
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
3
the SEL button
so the TRE indication appears on the display
panel. Within 5 seconds of choosing the Treble mode, rotate
2
the VOL control
CCW to decrease the treble response or rotate
2
the VOL control
CW to increase it as desired. The level will be
shown on the display panel from a minimum TRE -10 to a maximum
of TRE 10 (TRE 00 indicates flat response). The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the SEL button
on the display panel. Within 5 seconds of choosing the Balance
2
mode, rotate the VOL control
to the left channel speakers or rotate the VOL control
adjust it to the right channel speakers. The balance position will be
shown on the display panel from BAL 10L (full left) to BAL 10R (full
right). When the balance level between the left and right speakers
is equal, BAL L=R will be shown on the display panel. The display
will automatically return to the normal indication 5 seconds after
the last adjustment or when another function is activated.
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode
3
by pressing the SEL button
the display panel. Within 5 seconds of choosing the Fader mode,
3
so the BAL indication appears
CCW to adjust the stereo balance
2
CW to
so the FAD indication appears on
2
rotate the VOL control
balance to the rear speakers or rotate the VOL control
adjust it to the front speakers. The fader position will be shown on
the display panel from FAD 10R (full rear) to FAD 10F (full front).
When the level between the front and rear speakers is equal, FAD
F=R will be shown on the display panel. The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
LOUDNESS (LOUD)
When listening to music at low volume levels, this feature will boost
the bass and treble ranges to compensate for the characteristics
of human hearing. Press and hold the BAND/LOUD button for at
least 2 seconds to activate this feature; LOUD ON will appear on
the display together with LOUD. LOUD ON will remain for 5 seconds,
but the LOUD indication will remain on to indicate the function is
active. Pressing the button again for 2 seconds will deactivate the
feature; LOUD OFF will appear on the display panel and remain for
5 seconds and the LOUD indication will disappear.
AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the volume from the system
(MUTE will appear blinking on the display panel). Pressing the
button again or activating any other button/function will return to
the volume level setting in use before the Mute function was
activated. During cassette and disc changer play, pressing this
button will mute the audio; cassette and/or changer play will be
paused when this mode is active, but will resume play when the
mute function is terminated.
AM/FM BAND SELECTOR (BAND)
Each time the BAND/LOUD button is pressed momentarily, the
radio band is changed. The indication AM, F1, F2 or F3 will appear
on the display panel according to your selection.
-4-
CCW to adjust the front-rear speaker
2
CW to
Advertisement
